Screen Filters / Line Filters
Artikel-Nr.: 213-870
Example illustration, product may vary.
- Order number: 213-870
- Graduation: 1
- Minimum Quantity: 1
- Maximum Quantity: 1000
Filter Filter mesh Material filter insert Check valve Mesh size...more
Screen Filters / Line Filters
| Filter | Filter mesh | Material filter insert | Check valve | Mesh size | Screen surface | Flow rate | Operating pressure max. | Connections |
| 213-870 | 63 µ | wire mesh | - | 0,063 mm | 21 cm² | 2 l/min | 60 bar | G 1/4 |
| 213870F ¹ | 160 µ | wire mesh | - | 0,160 mm | 20 cm² | - | 60 bar | G 1/4 |
| 213-880 | 25 µ | wire mesh | - | 0,025 mm | 21 cm² | 2 l/min | 60 bar | G 1/4 |
| 213-890 | 320 µ | wire mesh | - | 0,320 mm | 21 cm² | 2 l/min | 60 bar | G 1/4 |
| 213-900 | 25 µ | wire mesh | 0,1 bar | 0,025 mm | 21 cm² | 2 l/min | 45 bar | M14x1,5 |
| 213-910 ² | 25 µ | wire mesh | - | 0,025 mm | 20 cm² | - | 60 bar | G 1/4 |
| 213-920 | 3 µ | screen mesh | - | 0,003 mm | 21 cm² | 2 l/min | 60 bar | G 1/4 |
| 213-930F | 160 µ | wire mesh | 0,1 bar | 0,160 mm | 21 cm² | 2 l/min | 45 bar | G 1/4 |
| 213-940 | 3 µ | wire mesh | - | 0,003 mm | 21 cm² | 2 l/min | 60 bar | G 1/4 |
| 213-950F | 160 µ | wire mesh | - | 0,160 mm | 20 cm² | 2 l/min | 60 bar | 2x G1/2 |
¹ grease, NLGI-class 000 and 00
² grease, NLGI-class 000
Pressure losses with clean filter: 0,38 bar (operating viscosity 100 mm²/s); 0,5 bar (operating viscosity 370 mm²/s)
Cleaning the filter insert
- Loosen the hexagon with SW13
- Remove the filter insert (can be removed with mounted tubes)
- Necessary space requirement below: about 40 mm
Available downloads:
| Filter | Filterfeinheit | Material Filtereinsatz | Rückschlagventil | Maschenweite | Siebfläche | Durchflussmenge | Betriebsdruck max. | Anschlüsse |
| 213-870 | 63 µ | Drahtgewebe | - | 0,063 mm | 21 cm² | 2 L/min | 60 bar | G 1/4 |
| 213870F ¹ | 160 µ | Drahtgewebe | - | 0,160 mm | 20 cm² | - | 60 bar | G 1/4 |
| 213-880 | 25 µ | Drahtgewebe | - | 0,025 mm | 21 cm² | 2 L/min | 60 bar | G 1/4 |
| 213-890 | 320 µ | Drahtgewebe | - | 0,320 mm | 21 cm² | 2 L/min | 60 bar | G 1/4 |
| 213-900 | 25 µ | Drahtgewebe | 0,1 bar | 0,025 mm | 21 cm² | 2 L/min | 45 bar | M14x1,5 |
| 213-910 ² | 25 µ | Drahtgewebe | - | 0,025 mm | 20 cm² | - | 60 bar | G 1/4 |
| 213-920 | 3 µ | Siebgewebe | - | 0,003 mm | 21 cm² | 2 L/min | 60 bar | G 1/4 |
| 213-930F | 160 µ | Drahtgewebe | 0,1 bar | 0,160 mm | 21 cm² | 2 L/min | 45 bar | G 1/4 |
| 213-940 | 3 µ | Drahtgewebe | - | 0,003 mm | 21 cm² | 2 L/min | 60 bar | G 1/4 |
| 213-950F | 160 µ | Drahtgewebe | - | 0,160 mm | 20 cm² | 2 L/min | 60 bar | 2x G1/2 |
¹ Fett, NLGI-Kl. 000 und 00
² Fett, NLGI-Kl. 000
Technical Drawings
| for item no. 213-870, 213-870F, 213-880, 213-890, 213-920
| for item no. 213-900, 213-910
|
| for item no. 213-940
| |
Viewed