- Order number: 206-100
- Graduation: 1
- Minimum Quantity: 1
- Maximum Quantity: 500
- For oils
- Operating viscosity: 20 - 1000 mm²/s
- Counter pressure max.:
at 1,3 l/min.: 5 bar
at 2,6 l/min: 3 bar - Speed range: 50 - 1500 rpm
- Suction height: max. 1000 mm
- Outer diameter of suction and pressure lines:
at 1,3 l/min: 8 mm
at 2,6 l/min: 10 mm - Direction of rotation: any (unvarying delivery direction)
- Suction connection (S): M14x1,5
- Pressure connection (P): M16x1,5
- Selectable version: shaft end or slit coupling
The listed flow rates refer to an oil viscosity of 140 mm²/s and counter pressure of 5 bar.
The image shows item no. 206-100: Version 1,3 l/min with shaft end.
Cam pump 206-100 for use in SKF CircOil centralized lubrication systems
These cam pumps are lubricant pumps that can be used for a large number of tasks. The indicated delivery rates apply to an operating viscosity of 140 mm²/s and a back pressure of 5 bars. If the operating viscosities or back pressures deviate from these values, the delivery rate and power requirements will change. Permissible operating viscosity: 20 to 1000 mm2/s.
Filtering
The pumps require filtration of the lubricant for a maximum particle size of 100 μm. If the metering elements, valves, flow monitors, etc. as well as the friction points to be supplied require finer filtration, that must be provided for in the delivery line (recommended value 25 μm).
Cam Pumps
For clock- or counterclockwise rotation, but for constant direction of delivery with changing direction of rotation. With these valveless piston pumps, the piston is driven directly via a cam so that only three constantly moving elements are involved.
This configuration results in dependable operation and a long service life. The fluids to be pumped must have enough lubricity for the pump to lubricate itself.